The six slots of screw are divided into upper and lower space by two star wheels enabling separate inhaling, compressing and exhaling. Therefore, a Single screw is equivalent to a double
reciprocating compressor with six cylinders. The technologically advanced design brings excellent performances which are evident in the follows aspects:
(1)Rational Structure
The star wheels are paired on both sides of the screw shaft to counteract the radial force acted on the shaft and the axial force on the channel by air. Hence the screw is free from any radial or axial force to achieve the absolute balance status.
(2) High-efficiency
While running, each screw works twice per rotation so the channel space is fully utilized to achieve more exhaling volume compared with the same structural & dimension air compressor. The screw slot depth of screw decreases with the increase of pressure. When exhaling finishes and the star wheel separate from the screw slot, the depth is zero without any clearance volume, then high volume efficiency is achieved. As apply unloading device and servo automatic air volume adjustment, the energy save effects is significant which as much as more than 60% of lower consumption when running at no load.
(3) No Vibration and Low Noise
As every rotation of the screw results in 12 compression cycles with 35280 times of exhaling per minute to achieve dynamic balance running, the exhaling process is free from pulses, so the machine vibration is close to zero that a coin can stand still on a running machine. In addition the adoption of sound eliminator and isolator reduces the noise level considerably lower than the other brands of
air compressors.
(4)Extended Maintenance Cycle
Free from any radial or axial forces and pressures in the air compression process, the shaft life of the air compressor can be as long as 50,000 hours, overcoming the easy wearability of the bearing and shaft seals of double
screw air compressor, extending the maintenance cycle, and its durability exceeds other counterparts.
(5) high reliability
The star wheels of
air compressor is made from PEEK materials, which has been proved of its high reliability in terms of air quality, energy saving, continual running, and low maintenance etc. over the years.
Displacement / discharge pressure ( m3/min.Mpa-1 ) | 2.5 / 0.7 | Transmission way | shaft coupling transmission |
2.3 / 0.8 | Air Supply Oil Content ( PPM ) | ≤3 |
2.1 / 1.0 | Caliber to take over ( Ømm ) | 20 |
1.8 / 1.3 | Cooling fan power ( KW ) | 0.3×1 |
Gas temperature ( ℃ ) | ≤Ambient temperature +15℃ | Size | Light ( mm ) | 1100 | |
Motor | Power ( KW/HP ) | 15 / 20 | Width ( mm ) | 700 | |
Speed ( r/min ) | 2970 | Height ( mm ) | 1000 | |
Way to start | Y-Δstar | Weight ( Kg) | 550 |
Voltage( V ) | 380 | Noise [dB(A)]±2 | 60 |